Residential Asphalt Sealing
Extend the life of your driveway with our residential asphalt sealing services. We use high-quality sealants to protect your asphalt from weather damage and wear.
Residential Asphalt Sealing
Asphalt sealing is a crucial maintenance procedure for extending the life of your driveway or any residential asphalt surface. It protects the asphalt from damage caused by weather, chemicals, and regular wear and tear.

Here’s a detailed step-by-step guide to help you understand and execute the process:
Step 1: Preparation and Inspection
1
Inspect the Asphalt Surface:
Begin with a thorough inspection of the asphalt surface to identify any significant cracks, potholes, or other damage. Take note of areas that need repair before sealing.
2
Clean the Surface:
Remove all debris, dirt, and loose material from the driveway using a broom or leaf blower.
For oil stains, use a degreaser or a specialized cleaner to ensure the sealant adheres properly.
Pressure wash the surface to remove any remaining dirt and debris. Allow the asphalt to dry completely, which might take a day or more depending on weather conditions.
3
Trim Overhanging Vegetation:
Trim back any grass, weeds, or bushes that encroach onto the driveway to ensure a clean edge and prevent interference with the sealing process.
Step 2: Repairing the Asphalt
1
Inspect the Asphalt Surface:
Begin with a thorough inspection of the asphalt surface to identify any significant cracks, potholes, or other damage. Take note of areas that need repair before sealing.
2
Fill Cracks and Potholes:
Use an asphalt crack filler to fill in any cracks. Follow the product instructions for best results.
For potholes, clean out any debris and fill them with an asphalt patching compound. Tamp down the material to ensure it's compact and level with the surrounding surface.
Allow sufficient drying or curing time for the repair materials as specified by the manufacturer.
3
Edge the Driveway:
Use an edging tool or a flat shovel to clean up the edges of the driveway, removing any loose asphalt and defining a clear boundary.
Step 3: Preparing the Sealant
1
Choose the Right Sealant:
Select a high-quality asphalt sealant suitable for residential use. There are different types of sealants, including coal tar and asphalt emulsions, each with its pros and cons.
2
Mix the Sealant:
Thoroughly mix the sealant according to the manufacturer’s instructions. This often involves stirring the product to a consistent texture and ensuring any settled materials are evenly distributed.
Step 4: Applying the Sealant
1
Application Tools:
Equip yourself with the appropriate tools such as a squeegee, brush, or spray system, depending on the product and personal preference.
2
Start Sealing:
Pour a small amount of sealant onto the asphalt starting from the highest point of the driveway.
Spread the sealant evenly with a squeegee or brush, working it into the asphalt. Apply the sealant in thin, even layers to avoid puddling.
Continue this process, working in sections, until the entire driveway is covered. Ensure even coverage and avoid leaving thick spots which can lead to uneven drying and potential peeling.
3
Detail Work:
Use a brush to apply sealant to edges and corners where the squeegee might not reach effectively.
Step 5: Drying and Curing
1
Drying Time:
Allow the sealant to dry according to the manufacturer's instructions. This can take from 24 to 48 hours, depending on weather conditions and the type of sealant used.
Protect the driveway from traffic, including foot traffic and pets, during this drying period by placing barriers or caution tape around the area.
2
Final Inspection:
Once the sealant is fully dry, inspect the driveway for any missed spots or uneven areas. Touch up as necessary.
Step 6: Maintenance Tips
1
Regular Cleaning:
Keep the driveway clean by regularly sweeping away debris and hosing down the surface to remove dirt and grime.
2
Periodic Resealing:
Plan to reseal the asphalt every 2 to 3 years, depending on the wear and tear and local climate conditions, to maintain its protective layer and appearance.
Made on
Tilda